R1234ze(E) refrigerant as an alternative for chillers and heat pumps
ESK Schultze GmbH & Co. KG
ESK level control ENC
With the optimized fill level control ENC for oils and refrigerants, ESK Schultze has included a one-point measurement in the sales program.
Level control ENC
With the optimized fill level control ENC for oils and refrigerants, ESK Schultze has included a one-point measurement in the sales program. The sensor is designed to detect refrigerant liquids and oils in refrigerant and oil receivers. The information "Fluid level" or "lack of liquid" is signaled via a relay. The optoelectronic sensor sends an infrared light beam via an LED, which is reflected via a prism to the receiver if there is no liquid. The detachable connection between the prism and the electronics allows the module to be replaced without having to open the cooling circuit. ESK components can be equipped with a direct sensor connection.
Related Products
Image
With the optimized fill level control ENC for oils and refrigerants, ESK Schultze has included a one-point measurement in the sales program.
Image
Electronic multi-point level control
Image
The temperature measurement with PTC temperature sensors (positive temperature coefficient) such as the Pt1000 already leads to an error of almost 1 Kelvin with two-wire cable runs of around 5 meters (cross-section 0.75 mm²)!
Image
The wireless sensor system is used to automate tasks related to temperature monitoring and is used in a wide variety of areas
Image
The AKS 4100 / 4100U level probe was specially developed to measure the liquid level of a wide variety of refrigerants including ammonia, HFCs, HCFCs and CO2 in containers, collectors, standpipes, etc.
Image
XSK is a pressure transmitter with a 4-20mA output signal.
Image
NSK, pressure transmitter, ratiometric
Image
AKS 11, AKS 12, AKS 21 The sensor unit is a platinum resistor.
More Products from ESK Schultze GmbH & Co. KG
Image
When compressors are operated in a network, oil level regulators are attached to the compressors to control the oil level.
Image
With the optimized fill level control ENC for oils and refrigerants, ESK Schultze has included a one-point measurement in the sales program.
Image
Electronic multi-point level control
Image
The combined oil separator-collectors are specially designed for use in high-pressure oil control systems.