HITEMA HYD SERIES

HYD SERIES  – HITEMA HYDRO-MODULE series, consists of water storage tank in carbon steel, open frame if only tank / closed frame in galvanized and painted steel if with single/double pump, expansion vessel, automatic filling valve, automatic air vent. 3bar maximum operating pressure.

These Units have been designed ONLY FOR INBUILT PUMP/S VERSION: 400V/3ph/50Hz electrical feed, IP54 protection rating, chillers suitable for outdoor installation.

Type of available configuration for pumps:

WP Single pump P3 with nominal pressure head 3 barg

DP Double pump P3 (run and standby, with automatic changeover every 24h or on fault) with nominal pressure head 3 bar

PH Single pump P5 with nominal pressure head 5 bar

DPH Double pump P5 (run and standby, with automatic changeover every 24h or on fault) with nominal pressure head 5 bar

HYD SERIES

HITEMA HYDRO-MODULE SERIES
TANK VOLUME 400L ÷ 5000L

• WP: Single pump P3 with nominal pressure head 3 barg
• DP: Double pump P3 (run and standby, with automatic changeover every 24h or on fault) with nominal pressure head 3 barg
• PH: Single pump P5 with nominal pressure head 5 barg
• DPH: Double pump P5 (run and standby, with automatic changeover every 24h or on fault) with nominal pressure head 5 barg