07. October 2022

ETM-Split - new compressed air dryer system saves heating energy through heat recovery

Image
ETM-Split - neues Drucklufttrockner-System

ETM-Split - new compressed air dryer system saves heating energy through heat recovery

MTA Germany from Nettetal on the Lower Rhine is now also supplying the proven refrigeration dryers of the DE-ETM series as a split system with dryer modules in 12 performance sizes for air volume flows of up to 225 cubic meters per minute.

Reduce gas or oil consumption through heat recovery

The strengths of this system are the extremely small footprint and almost no heat dissipation in the compressor room, since only the required drying modules are installed in the compressed air station. The waste heat from the required refrigeration unit is then either released to the outside air or used to heat a neighboring area of ​​the building. If necessary, users can use the system to support the hall heating during the entire heating period and thus reduce their gas or oil consumption by recovering the heat of condensation. As an example, MTA gives a savings potential of 40,000 kWh per heating period with an air volume flow of 20 m³/min. according to DIN-ISO conditions. Up to six ETM modules can be combined in a MASTER/SLAVE arrangement, with the built-in compressed air heat exchanger,

www.mta.de

 

DE ETM - modules for compressed air drying, air performance 20 -225m³/min.

 

Drying module(s) in the compressor room and separate refrigeration unit with the option of heat recovery